CE Approval PCB Cutting Machine Electric Control For 50mm Components Height

CE Approval PCB Cutting Machine Electric Control For 50mm Components Height

Features of v cut PCB Separator :

Ideal for thick PCBs
Can be used with aluminum, FR4, CEM3 and other substrates
Keeping pace with mid-to-large volume production
Panelized flexible or ultra-thin PCBs
Densely populated PCBs with components located too close to the score line for standard depanelers to handle
Aluminum and metalized substrates (in addition to FR4, CEM3, etc.)
PCBs are separated by the CWVC-450 dual wedge-shaped knives in one gentle rocking motion that shears the panel along the score line, without stress or damage to the PCBs or components. Even when metalized circuit boards are processed – such as those populated with heat-generating LEDs that require heat-dissipating metal inner layers – this machine will easily make the cut.

PCB depanel also cuts flexible and ultra-thin PCBs (down to 0.5 mm thick) clean, with no ripping or tearing, even when sensitive components such as delicate ceramic capacitors, are mounted within 0.5 mm of the score line. The linear, rather than circular, cutting surfaces allow for faster separations without added stress.

Alignment between the linear cutting blades and the panel's score line is achieved using a knob at the top of the machine. The narrow separation between the upper and lower blades (a maximum of 4 mm) protects the operator from the blade edges

Our YES PCB Depanelizer Machine Competitive Advantage :

Pneumatically driven and electric control

The machine is pneumatically driven and electric control .

The straight knife type separator machines were designed to separate pre-scored panel boards carefully, without bending or tension stress .

Even sensitive SMD-components like ceramic capacitors will not be damaged by the separate process .

Due to the special design of the knives also boards with high components placed close to the edges can be separated safely .

Based on a proven method of separating, wedge-shaped knives are used to cut the panels within the groove .

This enables boards of less than 1 mm thickness to be separated safely and without creating stress .

Most of our customers Questions about PCB Depaneling Mahcine 

 
1. Q:Do you have any certification for this machine?
A:YES,We have CE ISO FCC ROHS etc.
 
2. Q:What is warranty of the machine?
A:1 year.
 
3. Q:How do you pack the machine?
A:We fix the machine on the plywood base with screws to ensure safe transportation.
 
4. Q:What is life time of machine blades?
A:About 6-12 months.
 
5. Q:What is material of blades?
A:Japan high speed steel SKH-9
 
6. Q:Can the blades be sharpened?
A:Yes, they could be re-sharpened for 2-3 times.
 
7. Q:How do you offer oversea service?
A:We could send engineer to do installation and training for client if needs.
 
8. Q:Can we see your machine in our country?
A:Yes, we would like to offer contact details of our clients who are using our machines.

No Stress PCB Depaneler Specifications:

Our V Cut PCB Separator Application

Mainly design for high components SMD PCB factory.

LED Panel,Fiber Board,Aluminium Plate,Aluminium Substrate,Copper Substrate FR4,Glass Fiber Board